Draytek Vigor3300 Series, Руководство пользователя, Страница: 21 / 213

Vigor3300 Series User’s Guide
15
IP Mode Select an IP mode for this WAN interface. There are four available
modes for Internet access, Static , DHCP , PPPoE, and PPTP . On
this page you may configure the WAN interface to use Static (fixed
IP), DHCP (dynamic IP address), PPPoE or PPTP . Most of the
cable users will use the DHCP mode to get a globally reachable IP
address from the cable host system.
2
2
.
.
2
2
.
.
1
1
S
S
t
t
a
a
t
t
i
i
c
c
M
M
o
o
d
d
e
e
You can manually assign a static IP address to the WAN interface and complete the
configuration by applying the settings and rebooting your router. Choosing Static as the IP
mode, you will see the following page:
All the settings here are set by privately. Your ISP will not provide these settings.
IP Address Assign a private IP address to the WAN interface.
Subnet Mask Assign a subnet mask value to the WAN interface.
Default Gateway Assign a private IP address to the gateway.
Primary DNS Assign a private IP address to the primary DNS.
Secondary DNS Assign a private IP address to the secondary DNS.
IP Alias List Assign other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g., Advanced >>
NAT>>Port Redirection/DMZ Host ). Thirty-two IP addresses
settings are allowed at one time.
After setting up the WAN interface, the user can click Next to setup the LAN interface
continuously.