Vigor3300 Series User’s Guide
186
4.
Set Port 2 ~ Port 8 one by one in turn.
Type:
Port 1 ~Port 4 are
FXS
, Port 5 ~Port 8 are
FXO
.
Active:
Port 1 ~Port 8 are all
active
(
v
=Enable).
Group:
Port 1 ~Port 8 are
Group 1~ Group 8
independently.
Username:
Phone Number
of Port 1 ~ Port 8.
Proxy:
Port 1, 2, 5, and 6 are registered to
iptel
Proxy, and Port 3, 4, 7, 8 are registered
to
fwd
Proxy.
Codec:
Port 1 ~Port 8 all prior use
G.729A - 8kbps
.
5.
Enter the
VoIP - Status
page, wait one or two minutes (The time depends on SIP
Server's response speed and the network condition).
Register Status:
Display the register information from Port 1 ~ Port 8
. OK
means this
port is registered successfully.
Call Status:
Display calling information from Port 1 ~ Port 8.
Idle
means there is no
conversations on Port 1 ~ Port 8.
Содержание Vigor3300 Series
Страница 1: ......
Страница 152: ...Vigor3300 Series User s Guide 146 This page is left blank ...
Страница 182: ...Vigor3300 Series User s Guide 176 FXO card This card can connect to PSTN inside lines of PBX and FXS port on FXS cards ...
Страница 185: ...Vigor3300 Series User s Guide 179 Port Settings Port Edit Configure related VoIP settings for each port respectively ...