Draytek Vigor2200 Series, Руководство пользователя

Страница: 58 / 127

4-7
Advanced Setup
- Disable Dial-On-Demand: Specify the connection could be up
when it has traffic on the line. Once no any traffic over idle
timeout, the connecton will be down and never up again during
the schedule.
How Often : Specify how often the schedule will be applied.
- Once: Specify the schedule just once.
- Weekdays: Specify the schedule is according to weekdays.
4.3 NAT Setup
Usually you will use the router as a NAT-enabled router. NAT
stands for Network Address Translation. It means the router gets
one globally re-routeable IP address from the ISP. Local hosts will
use private network IP address defined by RFC-1918 to communiate
with the router. The router translates the private network addresses
to a globally routeable IP address, which is then used to access the
Internet. The following explains NAT features for specific applica-
tions.
Click ” NAT Setup ” to open the setup page. On the page you will
see the private IP address definitions defined in RFC-1918. Usu-
ally we use the 192.168.1.0/24 subnet for the Vigor2200USB.