Draytek Vigor VigorAccess, Быстрый старт

Страница: 15 / 16

Quick Start Guide for VigorAccess
13
$modify filter rule entry ruleid <id2>
status enable
$create filter rule map ifname all
ruleid <id2> stageid 1
S
How to Enable Spanning Tree Protocol
Users can use the following command to enable spanning tree protocol. The commands are listed as
below.
Command Description
$modify stp info enable
Enable STP globally
$modify stp port info portid
<bridge-port-id> enable Bridge port id: 1~193
$get stp port info portid
<bridge-port-id>
S
How to Enable IGMP Snooping
Users can use the following command to enable IGMP snooping. The commands are listed as below. Be
aware that IGMP Snooping is the Factory Default Setting.
Command Description
$create filter rule entry ruleid <id>
action sendtocontrol description IGMP
$create filter subrule ip ruleid <id>
subruleid 1 prototypefrom 2
prototypecmp eq
$modify filter rule entry ruleid <id>
status enable
$create filter rule map ifname all
ruleid <id> stageid 1
$modify igmpsnoop cfg info status
enable
$modify igmpsnoop port info portid
<bridge-port-id> status enable
leavemode fastNormal
or
$modify igmpsnoop port info portid
<bridge-port-id> status enable
leavemode Fast
The feature is enabled in default.
S
How to Upgrade Control Plane Code Remotely
Users can use the following command to remotely upgrade control plane code. Make sure you have
prepared TFTP server,
vendor supplied CP.bin.gz , and put CP.bin.gz into root directory of TFTP server.
The commands are listed as below.
Command Description
$firmware upgrade CP.bin.gz CP
<tftp-server-ip>
Upgrade the control plane code