Draytek Vigor VigorAccess, Быстрый старт

Страница: 13 / 16

Quick Start Guide for VigorAccess
11
S
How to Change Management IP Address for Existing Ethernet Port
Users can use the following command to change management IP address for existing Ethernet port. The
commands are listed as below.
Command Description
$modify aggr intf ifname aggr-0 ip
<new-ip> mask <new-mask>
Aggregation Ethernet
$modify ethernet intf ifname eth-* ip
<new-ip> mask <new-mask>
Non-Aggregation Ethernet
(*: 0 or 1)
S
How to Create more VC/EOA/Bridge
Users can use the following command to create more VC/EOA/Bridge. The commands are listed as
below.
Command Description
$create atm vc intf ifname aal5-* vpi
<vpi> vci <vci> lowif atm-*
[vcmux/llcmux] [fast/interleaved]
(*:0 ~ 23 is used for atm; 0~191 is used for aal5)
$create eoa intf ifname eoa-* lowif
aal5-*
(*:0~191 is used for aal5 and eoa)
$create bridge port intf portid
<bridge-port-id> ifname eoa-*
(*:0~191 is used for eoa,; 1~192 is used for
<bridge-port-id>)
S
How to Setup SNMP Community/Host/Trap
Users can use the following command to setup SNMP community/host/trap. The commands are listed as
below.
Command Description
$create snmp comm community <community>
<RW|RO>
Create SNMP community
$create snmp host ip <host-ip>
community <community>
Create a host to manage the device through SNMP
$create snmp traphost ip <host-ip>
community <community>
Create a host to capture the traps.
S
How to Create VLAN
Users can use the following command to create VLAN. The commands are listed as below.
Command Description
$create vlan static vlanname
<vlan-name> valnid <vlan-id>
[egressports <bridge ports>]
Create VLAN