Draytek Vigor VigorAccess, Быстрый старт

Страница: 12 / 16

Quick Start Guide for VigorAccess 10
S
How to Change ADSL Line Rate
Users can use the following command to change the ADSL Line Rate for specified DSL port. The
commands are listed as below.
Command Description
$modify adsl line intf ifname dsl-*
disable
Disable (*: 0 ~ 23)
$modify adsl line profile ifname dsl-*
atucintlmaxtxrate 0x7e0000
Necessary variables (*: 0 ~ 23)
$modify adsl line intf ifname dsl-*
enable
Enable (*: 0 ~ 23)
S
How to Change ADSL to Fast Channel/Rate
Users can use the following command to change the ADSL to fast channel/rate for specified DSL port.
The commands are listed as below.
Command Description
$modify adsl line intf ifname dsl-*
disable Disable (*: 0 ~ 23)
$modify adsl line profile ifname dsl-*
type fastOnly atucfastmaxtxrate
0x7e0000 Necessary variables (*: 0 ~ 23)
$modify adsl line intf ifname dsl-*
enable
Enable (*: 0 ~ 23)
S
How to Set ADSL Alarm Profile
Users can use the following command to change the ADSL Alarm profile for specified DSL port. The
commands are listed as below.
Command Description
$modify adsl line intf ifname dsl-*
disable Disable (*: 0 ~ 23)
$modify adsl alarm profile ifname
dsl-*
?
(*: 0 ~ 23, ?: means to get more information)
$modify adsl line intf ifname dsl-*
enable
Enable (*: 0 ~ 23)
S
How to Change VPI/VCI for Existing VCC
Users can use the following command to change VPI/VCI for existing VCC. The commands are listed as
below.
Command Description
$modify atm vc intf ifname aal5-*
disable
Disable (*: Existing aal5 interface)
$modify atm vc intf ifname aal5-* vpi
<new-vpi> vci <new-vci>
(*: Existing aal5 interface)
$modify atm vc intf ifname aal5-* enable
Enable (*: Existing aal5 interface)