background image

COPYRIGHT

This manual is copyrighted © 2011 by Drawmer Electronics, Ltd. With all rights
reserved. Under copyright laws, this manual may not be duplicated in whole
or in part without the written consent of Drawmer.

ONE YEAR LIMITED WARRANTY

Drawmer Electronics Ltd., warrants the MX40 Quad Punch Gate to conform
substantially to the specifications of this manual for a period of one year from
the original date of purchase when used in accordance with the specifications
detailed in this manual. In the case of a valid warranty claim, your sole and
exclusive remedy and Drawmer’s entire liability under any theory of liability will
be to, at Drawmer’s discretion, repair or replace the product without charge,
or, if not possible, to refund the purchase price to you. This warranty is not
transferable. It applies only to the original purchaser of the product. 

For warranty service please call your local Drawmer dealer. Alternatively call
Drawmer  Electronics  Ltd.  at  +44  (0)1709  527574.  Then  ship  the  defective
product,  with  transportation  and  insurance  charges  pre-paid,  to  Drawmer
Electronics Ltd., Coleman Street, Parkgate, Rotherham, S62 6EL UK. Write
the RA number in large letters in a prominent position on the shipping box.
Enclose your name, address, telephone number, copy of the original sales
invoice  and a detailed description of the problem. Drawmer will not accept
responsibility for loss or damage during transit.

This warranty is void if the product has been damaged by misuse, modification
or unauthorised repair.

THIS WARRANTY IS IN LIEU OF ALL WARRANTIES, WHETHER ORAL OR
WRITTEN, EXPRESSED, IMPLIED OR STATUTORY. DRAWMER  MAKES
NO  OTHER  WARRANTY  EITHER  EXPRESS  OR  IMPLIED,  INCLUDING,
W I T H O U T  

L I M I T A T I O N ,   A N Y   I M P L I E D  

W A R R A N T I E S  

O F

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-
INFRINGEMENT. PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER
THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT AS SPECIFIED
HEREIN.

IN NO EVENT WILL DRAWMER ELECTRONICS LTD. BE LIABLE FOR ANY
DIRECT,  INDIRECT,  SPECIAL,  INCIDENTAL  OR  CONSEQUENTIAL
DAMAGES  RESULTING  FROM  ANY  DEFECT  IN  THE  PRODUCT,
INCLUDING  LOST  PROFITS,  DAMAGE  TO  PROPERTY,  AND,  TO  THE
EXTENT PERMITTED BY LAW, DAMAGE FOR PERSONAL INJURY, EVEN
IF  DRAWMER  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF  SUCH
DAMAGES.

Some  states  and  specific  countries  do  not  allow  the  exclusion  of  implied
warranties  or  limitations  on  how  long  an  implied  warranty  may  last,  so  the
above limitations may not apply to you. This warranty gives you specific legal
rights. You may have additional rights that vary from state to state, and country
to country.
In the interests of product development, Drawmer reserve the right to modify
or improve specifications of this product at any time, without prior notice.

2

Содержание MX PRO MX40

















Отзывы: