CMC7
- Surround Monitor Controller
7
•
Interference:
If the unit is to be used where it maybe exposed to high levels of
disturbance such as found close to a TV or radio transmitter, we advise that the unit
is operated in a balanced configuration. The screens of the signal cables should
be connected to the chassis connection on the XLR connector as opposed to
connecting to pin1. The CMC7 conforms to the EMC standards.
•
Ground Loops:
If ground loop problems are encountered, never disconnect the
mains earth, but instead, try disconnecting the signal screen on one end of each of
the cables connecting the outputs of the CMC7 to the patchbay. If such measures
are necessary, balanced operation is recommended.
AUDIO CONNECTIONS
TYPICAL CONNECTION GUIDE
