DRAWMER
INSTALLATION
The CMC7 is a free standing, desktop unit. We have endeavoured to make the
CMC7 as small as possible without compromising on controls, connections and
above all sound quality. The unit has a footprint of just 18.7cm x 16.4cm with
controls on the top, with headphone, input and output connections on the rear.
POWER CONNECTION
6
The CMC7 unit will be supplied with an external switching mode power supply that
is capable of 100-240Vac continuous (90-264Vac max) and so should work globally.
We strongly advise that the power supply that has been supplied with the CMC7 is
used, rather than one with the equivalent ratings. In addition, should the power
supply fail for any reason we strongly advise that you contact Drawmer for a
replacement rather than repairing the unit yourselves. Failure to do either of these
could permanently damage the CMC7 and will also invalidate the warranty.
The power supply can be fitted with 4 interchangeable AC pins for the UK, European,
USA and Australian, though will be supplied with a type that is suitable for domestic
power supply outlets in your country, the others are available upon request. For your
own safety, it is important that you use the correct adapter. The power supply must
not be tampered with or modified.
Before connecting the CMC7 to the power supply ensure that all knobs are
turned off (i.e. fully anticlockwise). A switch next to the d.c. power inlet on the rear
of the unit switches the power on/off.
To help protect the CMC7 from theft the side has a Kensington Security Slot (also
called a K-Slot) which enables the fitting of hardware locking accessories that can
attach your CMC7 to an immovable object, making the CMC7 more of a challenge for
the potential thieves to steal.
SECURITY
POWER SWITCH
POWER SUPPLY INLET
