9
Software interface introduction
After the system is turned on, the nucleic acid detection interface is entered by
default. As shown.
1.Function control area
：
According to the substance you want to test, select the
corresponding test sample type, which is divided into Nucleic Acid NA and
Protein.
2.Open and Open Record
：
the date file in the list on the left to view the history
record.
3.Data display area: You can view the absorbance and ratio at 230, 260, and 280
nm.
4.Seting
，
You can view the type of nucleic acid or protein sample to be detected.
The nucleic acid has three kinds of dsDNA, ssDNA and RNA. The protein has
A280, BSA, IgG, Lysozyme, etc., and then click "Edit" to re-select.
5.Blank: Click to measure the blank buffer to measure the sample concentration.
6.Measure: After placing the sample, click to measure and read the sample
absorbance value, ratio, and concentration value.
7.Check: Click to view spectral connections, light intensity.
8.
Shutdown: Click on the instrument will shut down, after a few tens of seconds
1
3
2
