4. INTRODUCTION
- 5 -
4.1 SCOPE
This angle grinder uses abrasive disks to grind metals or masonry. It is intended for domestic and
infrequent light trade use only. Any other application is considered misuse.
4.2 SPECIFICATION
Stock no. ................................................................................................................................ 56457
Part no. ...................................................................................................................... AG650_115SF
Rated voltage ................................................................................................................ 230V~50Hz
Rated input .............................................................................................................................. 650W
Revolutions per minute (no load) ............................................................................. 0 – 11,000r/min
Disc Diameter .........................................................................................................................115mm
Bore: ............................................................................................................................. 7/8"/22.2mm
Sound pressure level (LpA)*: .............................................................................................. 82dB(A)
Sound power level (LWA)** .................................................................................................. 93dB(A)
Uncertainty (K): .......................................................................................................................3dB(A)
Vibration level: .................................................................................................. 2.24m/s², K=1.5m/s²
Weight ...................................................................................................................................... 1.8kg
* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to and declared
according to EN60745.
** The typical A-weighted noise level determined according to EN60745.
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
