- 2 -
1.
Remove right-hand end cover and
lampshade.
2.
Mark fixing holes in desired location on
mounting surface.
3.
Feed mains supply wire through either hole
on end covers and connect to the relevent
contact points in the terminal block located
on the right-hand end of the lamp frame.
4.
Once all wiring connections are complete,
mount the lamp frame in the position
required, then carefully install the
fluorescent tube (not supplied) and replace
the lampshade and end cover(s).
5.
If in doubt consult a qualified electrician for
advice or installation.
STOCK No.63260
1.
Lampshade
2.
Fluorescent tube (not supplied)
3.
Frame
4.
Right end cover
5.
Terminal block
6.
Screw
7.
Left end cover
INSTALLATION
465mm
53.9mm
73.8mm
589mm
662mm
STOCK No.63261
1080mm
53.9mm
73.8mm
1195mm
1271mm
