Draper GT2222, Инструкция по эксплуатации

Страница: 9 / 10

OPTIONAL ACCESSORIES
FITTING ACCESSORIES
Part No.AGP2
Stock No.56723
GT3525T Replacement Spool
Part No.AGP5
Stock No.56726
Replacement Nylon Spool Lines
Spool Line Replacement for Part Nos. AGP3 and AGP4:
With the spool removed from the trimmer gently prize off the white nylon ring
✪✌
over the
smaller rim
✫✌
. (Fig.1.)
Remove any excess line from the spool. Feed the end of the new line (AGP5) through the securing
holes
✬✌
(Fig.2.) and by applying heat melt the line end
✭✌
(Fig.3.) so it will not come back
through the hole. Now repeat this process for the other line.
Now position the spool with the recess
✮✌
(Fig.4.) facing downwards, wind the line around the
upper race in a clockwise direction.
When fully wound, feed the end of the line through the hole
✯✌
in the white nylon ring (Fig.5.),
then slide the nylon ring over the upper race to stop the line unwinding.
Now wind the other line in a clockwise direction round the lower race.
When fully wound, hold in place while sliding down the nylon ring so the line passes through the
slot
✰✌
(Fig.6.).
Fig.1.
Fig.2.
Fig.3.
Fig.4. Fig.5.
Fig.6.
Part No.AGP4
Stock No.56725
GT4729DA Replacement Spool