Draper GT2222, Инструкция по эксплуатации

Страница: 2 / 10

GUARANTEE
Draper Garden Power tools have been carefully tested and inspected before shipment and are guaranteed to be free
from defective materials and workmanship for a period of 12 months from the date of purchase except where tools are
hired out when the guarantee period is ninety days from the date of purchase.
Should the machine develop any fault, please return the complete tool to your nearest authorized warranty repair agent
or contact Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone: (023) 8026 6355.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried
out free of charge. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by
misuse, careless or unsafe handling, alterations, accident, or repairs attempted or made by any personnel other than the
authorized Draper warranty repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorized.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your
proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited, Hursley Road, Chandler’s Ford,
Eastleigh, Hampshire. SO53 1YF. U.K.
DECLARATION OF CONFORMITY
We Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England.
Declare under our sole responsibility that the product:
Stock No. 56477 & 56478 Part No. GT3525T & GT4729DA
Description: GRASS TRIMMERS
To which this declaration relates is in conformity with the following directive(s): 98/37/EEC,
89/336/EEC & 73/23/EEC.
With reference to: DINVDE0730-2ZP, DINVDE0730-1, EN55014-1, EN55014-2, EN61000-3-2 & EN60001-3-3.
JOHN DRAPER
Managing Director
POWER SUPPLY
CONNECTING YOUR MACHINE TO THE POWER SUPPLY:
To eliminate the possibility of an electric shock, your machine has been fitted with a BS approved,
non-rewirable moulded plug and cable which incorporates a fuse, the value of which is indicated on
the pin face of the plug. Should the fuse need to be replaced, an
approved BS1362 fuse must
be used of the same rating, marked thus .
The fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover
is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red).
If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now
be suitably prepared and the correct type of plug fitted. See below.
*WARNING:
A plug with bare flexible wires exposed is hazardous if engaged in a live power socket outlet.
WARNING: THIS APPLIANCE IS DOUBLE INSULATED.
Blue - Neutral, Brown - Live.
As these colours may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter
'N' or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with the
letter 'L' or coloured red or brown.
01/99