Section 3 -
Mounting Roller Assemblies, Couplers, and Brackets
Caution:
Before mounting shades, verify measurements on the card provided with the shade, and ensure the brackets are installed
at the correct width.
SHAFT
FULLY
RETRACTED
ROTA
TE
to
R
ET
RA
CT
1.
Measure and mark
mounting surface
(s)
.
3.
Attach motor end of roller to
bracket and hold in place.
Caution:
Ensure the operator-end
fabric/roller assembly's coupler shaft
is
fully retracted
(see "Operating the
Retractable Shaft").
4.
Slide the coupler onto the coupler shaft
of the first fabric/roller assembly
to be installed, and hold in place.
Caution:
Ensure the operator-end
fabric/roller assembly's coupler
shaft is
half extended
.
SHAFT
HALF
EXTENDED
A
B
Please Note:
If cable does not fit through
cutout, drill a hole near the bracket in a
hidden location.
Please Note:
Use measurements instead of
the roller to determine placement.
2.
Attach motor bracket
and couplers to surface
using appropriate
fasteners.
page 4 of 12
Motorized FlexStyle
TM
(Coupled)
