- 8 -
ASSEMBLY
4. Ease table bracket and rack all the way down
onto the column. Replace collar
-
and re-
tighten the grub screw, locking rack
.
into
place.
5. Slide table
/
into the table bracket as
shown in Fig.6 and lock into place using the
table locking handle
0
.
6. Fix table raising handle
1
and bracket
locking handle
2
as shown in Fig 6.
7.Place the drill press head
3
onto column as
far as it will go (seek assistance as it is heavy).
Align the head and table to drill press base and
tighten the two head locking screws
4
as
shown in Fig 7.
Fig.5.
Fig.6.
Fig.7.
-
.
4
3
/
0
1
2
