- 12 -
OPERATION AND USE
Fig.17.
Fig.20.
Fig.18.
*
,
+
-
Fig.19.
/
.
1
0
1. The table
*
Fig. 17 can be raised or
lowered on the drill press column by
loosening the table clamp handle
+
and
turning the table raising and lowering handle
,
. After the table is at the desired height,
tighten handle
+
.
2. The table can be rotated 360º on the table
bracket by loosening lock handle
-
Fig. 18.
3. The table can be tilted right or left by
unscrewing and removing the table alignment
stud
.
Fig. 18.
4. Loosen table locking bolt
/
, tilt table to
desired angle. Retighten bolt
/
. When
returning table to the level position replace
table alignment grub screw. This will
automatically position the table surface at 90º
to the spindle.
5. A tilt scale
0
Fig. 20 is provided on the
table bracket casting to indicate the degree
of tilt. A cursor line
1
is also provided on
the table to line up with the scale.
