4. INTRODUCTION
4.1 SCOPE
12 speed drill with 16mm chuck. Suitable for enthusiasts and tradespeople alike. Any application
other than that it was intended for, is considered misuse.
Designed to drill into wood, plastics, ceramics, and many metals (drill bits sold separately).
4.2 SPECIFICATION
Stock No. ........................................................... 95301 ......................................................... 94803
Part No. ......................................................... BD375/12D ........................................... DP375/12D
Rated voltage .................................................... 230V ........................................................... 230V
Rated frequency ................................................ 50Hz ........................................................... 50Hz
Rated input ........................................................ 375W .......................................................... 375W
Speed settings ......................................................12 ................................................................. 12
Revolutions per minute (no load) .............. 230-2,470min-1 ...................................230-2,470min-1
Chuck capacity .............................................. 1.5-16mm ............................................... 1.5-16mm
Drilling capacity ..................................................16mm ........................................................ 16mm
Spindle taper ....................................................... B16 .............................................................. B16
Spindle travel .....................................................80mm ........................................................ 80mm
Throat ................................................................152mm ..................................................... 152mm
Column Ø ...........................................................65mm ........................................................ 65mm
Collar Ø .............................................................55mm ........................................................ 55mm
Table dimensions ..........................................245x245mm .......................................... 245x245mm
Base dimensions ...........................................245x385mm .......................................... 245x385mm
Height ................................................................868mm ................................................... 1565mm
Sound power level ............................................. 75db(A) .................................................... 75db(A)
Sound pressure level ........................................ 86db(A) .................................................... 86db(A)
Weight ...............................................................32kgs ......................................................... 39kgs
4.3 HANDLING & STORAGE
– Care must be taken when handling this product.
●
Dropping this power tool could have an effect on its accuracy and could also result in personal
injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
●
Exposure to damp air can gradually corrode components.
●
If the product is unprotected from dust and debris, components will become clogged.
●
If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to prEN ISO 15744:1999
and declared according to EN ISO 4871.
** A-Weighted Sound Power Level in accordance to prEN ISO 15744:1999 and declared according to EN ISO 4871.
- 5 -
- 20 -
11.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air
inlets. After use disconnect the tool from the power supply and vacuum the ventilation slots.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
At regular interval, lubricate the spindle with a medium purpose grease. With the pulley cover
open, pack the grease down the centre of the front pulley. Operate the plunger mechanism and
brush a thin film of grease on the quill. Clean any debris built up in the pulley housing. Spray a
general purpose lubricating agent/rust inhibitor on the other moving parts and machined surfaces.
11. MAINTENANCE
