Draper 83591, Инструкции для

Страница: 7 / 24

7
5. HEALTH & SAFETY INFORMATION
Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s
instructions;
Ensure that blotters are used when they are provided with the bonded abrasive product and
when they are required;
Ensure that the abrasive product is correctly mounted and tightened before use and run the
tool at no-load for 30 seconds in a safe position, stop immediately if there is considerable
vibration or if other defects are detected.
If this condition occurs, check the machine to determine the cause;
If a guard is supplied with the tool never use the tool without such a guard.
Do not use separate reducing bushings or adapters to adapt large hole abrasive wheels;
For tools intended to be fitted with threaded hole wheel, ensure that the thread in the
wheel is long enough to accept the spindle length;
Check that the work piece is properly supported;
Do not use cutting wheel for side grinding;
Ensure that sparks resulting from use do not create a hazard e.g. do not hit persons, to ignite
flammable substances;
Ensure that ventilation openings are kept clear when working in dusty conditions. If it should
become necessary to clear dust, first disconnect the tool from the mains supply (use non
metallic objects) and avoid damaging internal parts;
Always use eye and ear protection;
Personal protective equipment such as dust mask, gloves, helmet and apron should be worn;
The wheel continues to rotate after the tool is switched off.
Warning: Prior to mounting an abrasive wheel ensure the expiry date has not exceeded
rendering it potentially hazardous.
1. Warning. When using electric tools, basic safety precautions, including the following
should always be followed to reduce the risk of fire, electric shock and personal injury.
2. Use the right tool. Do not force small tools or attachments to do the job of a heavy duty
tool. Do not use tools for purposes not intended; for example, do not use circular saws to
cut tree limbs or logs.
3. Secure work. Use clamps of a vice to hold the work. It is safer than using your hands and
it frees both hands to operate the tool.
4. Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you
are tired.
5. Wear proper clothing. Do not wear loose clothing, neckties or jewellery (ring,
wristwatches etc.) to catch in moving parts. NONSLIP footwear is recommended. Wear
protective covering to contain long hair. Roll long sleeves above the elbow.
6. Use safety goggles (Head protection). Wear goggles approved to the relevant standards
at all times. Normal spectacles only have impact resistant lenses, they are NOT safety
glasses. Also, use face or dust mask if application is dusty and ear protectors during all
operations.
7. Sound levels. Some types of machines may have high sound levels when working. In such
cases ear protection must be worn.
8. Vibration levels. Hand held power tools produce different vibration levels. You should
always refer to the specifications and the relevant Health and Safety guidelines.
9. Dust extraction. If your tool is fitted with a dust extraction facility, always ensure that it
is connected and being used with a dust extractor. Vacuum cleaners can be used if
suitable for the material being extracted.