Dranetz DranTech Xtra, Руководство пользователя

Страница: 24 / 68

24
DranTech X
TRA
User’s Guide
Control Functions
During Recording
STORE
is displayed underneath the analog display during memory
mode operation, and memory occupancy can be controlled:
StoP 000 . 3%
The following message appears as soon as memory is full: “100.0%”.
In order to be able to observe measured values during recording ,
switch to the measuring function by pressing MEASURE | SETUP .
The display is returned to the memory menu after once again pressing
MEASURE | SETUP .
A new memory block is created when another measuring function is
selected with the rotary switch or the
FUNC | ENTER key. Data stor-
age then continues automatically.
Ending Recording
∞
“StoP ” appears at the display after pressing MEASURE | SETUP .
StoP StArt
∞
Acknowledge the “StoP ” display by pressing FUNC | ENTER .
STORE
is cleared from the display, indicating that recording has
been ended.
∞
Press MEASURE | SETUP in order to return to the measuring
function.
∞
Memory mode operation can also be exited by switching the multi-
meter off.
Querying Memory Occupancy
Memory occupancy can be queried during recording with the help of
the “
1nFo ” menu (see also chapter 6.3).
Memory occupancy range: 000. 1% to 099.9%.
1nFo bAtt: ... 0CCUP %: 0 17.4%
Memory occupancy can be queried before recording is started via the
“
StorE ” menu.
1nFo ... StorE 0 17.4 % StArt
Clear Memory
This function deletes all measured values from memory!
This function cannot be executed during memory mode operation.
1nFo ... StorE 017.4 % U StArt
CLEAr EMPtY
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
FUNC
ENTER