DRAMIŃSKI
4Vet
Slim
user manual
_________________________________________________________________________________________
19
Warning!
Regarding the complicated construction of probes it is necessary to treat them with due
caution and protect against falls or damage. The active surface (the front of the probe)
should be protected against mechanical damage, for example, avoid scratches.
The probe is the element of the ultrasound scanner which should be disinfected before
each use.
6.5. Starting the device using the mains supply.
1. Connect the adapter to the 110-230 V / 50-60 Hz grounded outlet
2. Connect the adapter's connector to the socket on the device casing
3. Switch on the device pressing the power button
which is on the right side of the casing
4. Wait while the system of the ultrasound scanner uploads and the user panel appears on the screen
5. Check if the connected probe is adequate with the symbol appearing on the screen (Fig. 11, no 9) and check
if there is a response when you touch the head of the probe.
6.6. Starting the device using battery power supply
1. Connect and lock the battery back at the back side of the casing < 6.4. >.
2. Switch on the device pressing the power button
which is on the right side of the casing
3. Wait while the system of the ultrasound scanner uploads and the user panel appears on the screen
4. Check if the connected probe is adequate with the symbol appearing on the screen (Fig. 11, no 9) and check
if there is a response when you touch the head of the probe.
Attention! The battery supply is cut off automatically when the mains power supply is connected to the
device.
6.7. Finishing work
In order to finish work press the power button
. When the monitor blanks out it is necessary to carry out
cleaning and disinfection of the device according to the recommendations given in the part "Maintenance of the
device" (Chapter 12).
If you would like to stop the device working immediately press the power button
.