26
937.746.4556 |
www.rldrake.com
Event Log Tab Screen
The "Event Log Tab" (Figure 12) is a "read and write" screen where the following parameters are displayed or configured.
The data in Event Log can be forwarded to a SysLog database – (see , , & of the "Admin Tab" section for
details). The lines are color coded as follows:
Red font
= error message
Blue font
= informational message
Green font
= confirmation or feedback message
Event Log Tab
Event Log Destination:
see of the "Admin Tab" section for details.
Log Destination Port #:
see of the "Admin Tab" section for details.
Clear Log:
allows user to clear the records generated during unit’s boot-up process and operation afterward. The
records are retained if the unit loses power.
Lines to Display:
allows the user to select the number of lines to be displayed. The unit supports up to 400 Mb of data
or approximately 65,000 lines. The range is 1 to 65,535.
Save Number of Displayed Lines:
allows the user to save the error log on the screen. Please note that the error log
would be saved only on the screen and not on any database.
Figure 12 - "Event Log" Screen
1
2
3
4
5
18
21
22
23
19
1
2
4
3
5
