23
22
TiTre
TiTre
INSTALLING THE UNIT
-
STEP SEQUENCE -
Clamp
2) CoNNeCt tHe Dust AND wAter iNLets
• Connect the building’s cold water supply to the unit’s water inlet.
Clamp
Practical plug for
maintenance
(When needed, use a
brush to clean the
inside of the tubes)
INSTALLING THE UNIT
-
STEP SEQUENCE -
• Lift the unit and slide its support onto the
wall bracket.
• If your unit is equipped with a lower tank, repeat the same steps to attach it to the wall.
• If your unit is equipped with one or several booster heads, repeat the same steps to attach it, or
them, to the wall.
Optimum efficiency
Not recommended
each booster head can be installed according to the available space without compromising the height of the
head in relation to the unit.
However, we recommend that you keep the number of joints (elbows) to a minimum to optimize air circulation
and performance.
positioNiNG A Booster HeAD
positioNiNG tHe Lower tANk
Not recommended
• A backflow preventer may be
required in some municipalities.
It is installed at the water input of
the unit and prevents a backflow
of the unit in the main pipeline of
the residence.
• Connect the dust inlet
(transparent tubes) to the unit
securing it with a clamp.
* N.B. The tubes have been pre-
assembled by pressure. Do not
use glue.
• Connect the suction hose to the
unit’s dust inlet, securing it with
a clamp.
Backflow preventer
(Optional, sold seperatly)
quick connect
(Push-in the nozzle to
insert the cable and
release to lock-in)