wiring configuration class A / B - 4 channel
DAF 1
004
wiring configuration class A / B - 4 channel
DAF 1
004
24
25
#16
DAF 1004 -
2-OHM STEREO LOAD
MiDrAngE
croSSovEr
croSSovEr
tWEEtEr
4-ohM tWeeteR In PARAllel
tWEEtEr
tWEEtEr
tWEEtEr
= 2-ohM SteReo loAD
MiDrAngE
MiDrAngE
MiDrAngE
4-ohM MIDRAnGe
= 2-ohM SteReo loAD
bAnD pASS FroM 400hz - 4Khz chAnnEl 3 AnD 4
BAnD PASS SWItCh SettInGS
high pASS FroM 4Khz chAnnElS 1 AnD 2
hIGh PASS SWItCh SettInGS
Four 4-ohm speakers installed in parallel.
Do not mix impedances and do not run amp below 2-ohm stereo load per channel
#17
DAF 1004 -
BASIC 3-CHANNEL CONFIGURATION
the DAF 1004 is classified as an unbalanced amplifier as the power of channels 1/2 is not equal to the power of channels 3/4.
its purpose and design was to deliver optimum 3-channel system performance. All channels are 1-ohm stable in stereo mode and you may be bridged
to a 2-ohm.
croSSovEr
MiDrAngE
tWEEtEr
croSSovEr
tWEEtEr
= 2-ohM SteReo loAD
SUbWooFEr
DvC 2-ohM WooFeR WIReD In SeRIeS to 4-ohM
SUbWooFEr
= 2-ohM BRIDGeD
MiDrAngE
bAnD pASS FroM 20hz - 100hz chAnnEl 3 AnD 4
SUBWooFeR SWItCh SettInGS
bAnD pASS FroM 100hz - 4Khz chAnnElS 1 AnD 2
hIGh PASS SWItCh SettInGS
