IRDA-WELDER TX-999
user manual
7. Maintenance
(1). Main body maintenance
：
After the machine has been used for a period of time, clean the
focusing frame, the guide rod, the PCB board support and the sliders and
treat them with a lubricant to protect them from rust.
(2). Preheating plate and infra-red lamp body maintenance
：
Clean the pre-heating chassis and in particular the infrared lamp
body with dehydrated alcohol. Otherwise residue from evaporated
soldering paste could otherwise decrease the effectiveness of the infrared
lamp.
8. Caution
1. Do not cut the power off right after the work finished. Please wait
until the fan cools down the lamp body.
2. Insure the cooling fan is unobstructed and clean.
3. Be careful of operating under high temperature condition.
4.Pull out the power plug if you don’ t use it for a long term.
9
.
Warranty
The complete machine has a warranty period of 1 year from the time
of purchase in malfunctions ( not external case issues – bend – stains or
consequences of shipping ) and lifelong service support as well as a
http://www.puhuit.com/
11
