IRDA-WELDER TX-999
user manual
3.
Assemble circuit board support
According to the following picture, assemble the components of
circuit board support and tighten the screw.
slider
Bakelite bolt
Board support of
the circuit
Guide rod
motional stick
Fasten screw nut
Fasten pipe
6. Operating instructions
1.
Examination and starting
(1). Inspect the infrared lamp body, temperature sensor and power line
and see if they are in good condition.
Attention: the temp-sensor must be connected with the preheating chassis.
(2). Turn on the power switch, then use self-checking first (the previous
setting value demonstrated on the keyboard display monitor after turn on
the machine).
(3). The front panel has two switches: one controls the pre-heating plate,
the other the infrared lamp separately. Press the“
▲
” (blue button)or
“
▼
”(red button)on the “IR PRE-HEAT PLATE” on the front panel to
choose a temperature between
0 and 350
℃
for preheating plate. Press
the “SWITCH” button (the indicator light works) and the preheating plate
http://www.puhuit.com/
7
