Dräger MU10916, Инструкция по эксплуатации, Страница: 7 / 82

Page 7
Installation Procedure for Resuscitaire® Birthing Room Warmer Model
WBR82
1. Place the radiant warmer flow label (A) (MU11129, WBR82) on the post directly
above the existing flow label (see figure 2 on page 7).
2. Install the micro-volume suction bottle holder (C) on the existing suction bottle holder.
NOTE:
If it does not fit securely, pinch the clips together and release.
3. Push the supply connection tubing (D) inside the column leaving only the blue end
showing.
4. Connect the micro-volume suction bottle filter (F) in line with the supply connection
tubing (D) and the suction bottle (G).
5. Place the suction bottle (G) in the micro-volume suction bottle holder (C).
6. Connect the desired suction tubing to the outlet port (H) of the suction bottle cap, and
secure the free end of the extension tubing in either tubing retaining slot provided on
the front or rear panel of the bassinet.
Figure 2. Resuscitaire® Birthing Room Warmer Model WBR82