Dräger MMG 0001, Инструкция по эксплуатации

Страница: 14 / 186

14 Instructions for use |
X-act
®
7000
en |
Description
These trademarks are only registered in certain countries and not necessarily
the country in which this material has been published.
3 Description
3.1 Product overview
The scope of delivery for the device may additionally include accessories. The
basic set may be combined with sensors and hoses for remote measurement.
This requires the connection of the Dräger X-am pump using the Dräger X-act
7000 Coupler.
3.1.1 Dräger X-act 7000
Graphic A
3.1.2 Basic set
Graphic B
Please observe and adhere to the instructions for use of additional parts, if
provided.
The following components are included in the scope of delivery:
3.1.3 Accessories
Graphic C
The device may be used with the following components for remote and sensor
measurements:
3.1.4 Operation and navigation
The device has three keys. These have been positioned on the device below
the displays which they are used to control (Graphic D/1). Below, these are
referred to as softkeys.
No. Designation No. Designation
1 X-act 7000 7 Holder for Coupler
2 Device keys 8 Ring for carrying strap
3 Display 9 Battery cover
4 LED signal light 10 Retainer for Dräger MicroTubes
5 Infrared interface 11 Mini USB port
6 Gas inlet 12 Gas outlet
No. Designation Order number
Basic set: 8610800
1 X-act 7000
2 Dräger MicroTubes Demo 8610290
3 Torx screwdriver (T10) 8326823
4 Carrying strap 3356165
5 Ex-protected batteries (5x) 3703133
6 Mini USB 8318657
7 Instructions for use 9300024
No
. Designation Order number
1 X-act 7000 Coupler 8610810
2 X-am pump 8327100
3 Accessories www.draeger.com