476
Issue date: 17 November 2006
54 of 80
Aerial
2
4
0
0
Fire Rescue
Unit
0
0
5
9
Inc EDBA
cylinder
attached to
RTC frame x 4
Rapid
Response
Team
0
0
8
8
Station
Reserve
1
PL x 5
P x 4
Aerial x 2
0
0
Station
Reserve
FRU/RRT
0
0
1
8
22
Defective equipment
Returns procedure
22.1
When an item becomes defective the station is to complete a POMS order and fill out the details
required for the defective item.
22.2
POMS will automatically print off a docket for the defective item (OSG items only). This should be
attached to the item that is to be exchanged and the item left in the agreed collection point at
your location.
22.3
A replacement item will automatically be issued from OSG/Operations Support Centre (OSC) on
receipt of a POMS order. Once the item has been received the station should close the order on
POMS.
22.4
Stations should contact logistics manager at RMC on extension 88321 for ‘urgent’ replacement of
BA set(s). For example if appliance BA set level has dropped below two BA sets.
22.5
All items must be cleaned before returning to OSG/OSC.
Defective BA sets
22.6
The following items must be sent with the BA set:
•
Bodyguard key and tally (ensure tally and telemetry module identification numbers match).
•
Face mask in its bag.
•
Personal line .
•
Log book (completed with details of the defect and reversed in wallet, to indicate that the BA
set is defective).
•
All protective blank caps including the cylinder connection blank cap should be in position.
22.7
Do
not
send:
•
BA cylinder or its cover.
•
BARIE equipment if fitted.
•
BA cable cutter and pouch.
