Drager Vyana Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 36

Drager Vyana Скачать руководство пользователя страница 6

6

For your safety and that of your patients

General safety information

The

following

WARNING

and

CAUTION

statements apply to general operation of the medical
device.
WARNING  and  CAUTION  statements  specific  to
subsystems  or  particular  features  of  the  medical
device  appear  in  the  respective  sections  of  these
instructions  for  use  or  in  the  instructions  for  use  of
another product being used with this device.

Strictly follow these instructions for use

WARNING

Any use of the medical device requires full
understanding and strict observation of all
sections of these instructions for use. The
medical device is only to be used for the pur-
pose specified under "Intended use" on page
9.

Strictly observe all WARNING and CAUTION
statements throughout these instructions for
use and all statements on medical device
labels. Failure to observe these safety
information statements constitutes a use of the
medical device that is inconsistent with its
intended use.

WARNING

To avoid the risk of electric shock, the equipment
must only be connected to a supply mains with
protective earth.

Maintenance

Safety inspections

The medical device must be subject to regular safety
checks. See chapter "Maintenance".

Not for use in areas of explosion hazard

WARNING

This medical device is neither approved nor
certified for use in areas where combustible or
explosive gas mixtures are likely to occur.

WARNING

The medical device must be inspected and
serviced regularly by professionals who pos-
sess the required qualifications due to their
training and experience. Repair of the medical
device must also be performed by trained per-
sonnel with additional product-specific
DrägerService training.

Dräger recommends that a service contract is
obtained with DrägerService and that all repairs
are performed by DrägerService. Dräger further
recommends that only authentic Dräger repair
parts are used for maintenance.

If the above are not complied with, the correct
functioning of the medical device may be
compromised.

See chapter "Maintenance" on page 26.

«
...
4
5
6
7
8
...
»

Содержание Vyana





































Отзывы:

Нет отзывов