background image

 

 

CALL TOLL-FREE 

1-800-DR-OWNER         

5

 

 

Protecting Yourself and Those Around You  

 
 
 

THIS IS A HIGH-POWERED MACHINE, WITH MOVING PARTS OPERATING WITH HIGH ENERGY AT HIGH 
SPEEDS.  YOU MUST USE PROPER CLOTHING AND SAFETY GEAR WHEN OPERATING THIS MACHINE TO 
PREVENT OR MINIMIZE THE RISK OF SEVERE INJURY.  THIS MACHINE CAN CUT, AND SEVER PARTS OF 
YOUR BODY IF THEY BECOME IN CONTACT WITH THE MOVING BLADE.  ALWAYS TAKE THE FOLLOWING 
PRECAUTIONS WHEN OPERATING THIS MACHINE: 

• 

ALWAYS WEAR PROTECTIVE GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS WHILE MOWING TO 
PROTECT YOUR EYES FROM POSSIBLE THROWN DEBRIS.

 

• 

WEAR SHOES WITH NON-SLIP TREADS WHEN USING YOUR DR SCOUT FIELD AND BRUSH MOWER.  
IF YOU HAVE SAFETY SHOES, WE RECOMMEND WEARING THEM.  DO NOT USE THE MACHINE 
WHILE BAREFOOT OR WEARING OPEN SANDALS. 

• 

AVOID WEARING LOOSE CLOTHING OR JEWELRY, WHICH WILL CATCH ON THE MOWER’S MOVING 
PARTS. 

• 

WE RECOMMEND WEARING GLOVES WHILE MOWING.  BE SURE YOUR GLOVES FIT PROPERLY AND 
DO NOT HAVE LOOSE CUFFS OR DRAWSTRINGS. 

 

 

Operating the Mower Safely 

 

 
 

THIS IS A HIGH-POWERED MACHINE, WITH MOVING PARTS OPERATING WITH HIGH ENERGY AT HIGH 
SPEEDS.  YOU MUST OPERATE THE MACHINE SAFELY.  UNSAFE OPERATION CAN CREATE A NUMBER OF 
HAZARDS FOR YOU, AS WELL AS ANYONE ELSE IN THE NEARBY AREA.  ALWAYS TAKE THE FOLLOWING 
PRECAUTIONS WHEN USING THIS MACHINE: 

• 

NEVER ALLOW PEOPLE WHO ARE UNFAMILIAR WITH THESE INSTRUCTIONS TO USE THE DR SCOUT 
FIELD AND BRUSH

 

MOWER. 

• 

KEEP BYSTANDERS AT LEAST 100 FEET AWAY FROM YOUR WORK AREA AT ALL TIMES.  THE MOWER 
CAN THROW OBJECTS FAR AND AT GREAT SPEEDS.  TO BE SAFE, DO NOT OPERATE THE MACHINE 
NEAR SMALL CHILDREN OR PETS, AND NEVER ALLOW CHILDREN TO OPERATE THE MOWER.  
DISENGAGE THE BLADE AND STOP THE ENGINE WHEN ANOTHER PERSON OR PET APPROACHES. 

• 

CLEAR THE AREA OF OBJECTS SUCH AS ROCKS, TOYS, WIRE, BONES, STICKS ETC., WHICH COULD BE 
PICKED UP AND THROWN BY THE BLADE. 

• 

BE SURE ALL BLADE AND WHEEL CONTROLS ARE DISENGAGED BEFORE ATTEMPTING TO START THE 
ENGINE.  ENGAGE AND DISENGAGE THE BLADE A FEW TIMES TO GET USED TO IT BEFORE MOWING. 

• 

KEEP YOUR HANDS AND FEET AWAY FROM THE BLADE, BELTS, CHAINS, BLADE PULLEYS, AND 
CONCEALED AREAS WHILE THE ENGINE IS RUNNING.  NEVER REACH UNDER THE DECK OR GRAB 
HOLD OF ANY PART OF THE DECK WHEN THE ENGINE IS RUNNING. 

Содержание SCOUT FIELD and BRUSH MOWER























































Отзывы: