www.sentera.eu
MIW-DRX-EN-000 - 27 / 11 / 2015
4 - 7
back to the table of contents
PRODUCT DESCRIPTION
The DRX/DRY controller controls manually the speed of single phase (230 VAC / 50 -
60 Hz) voltage controllable motors / fans from high to low (DRX) or from low to high
output (DRY). It is suitable for DIN rail mounting (DIN EN 50022). Multiple fans can
be connected as long as the current limit is not exceeded.
ARTICLE CODES
Code
Regulation
Max. rated current
Max. load L1
Fuse 5*20mm
DRY-1-15-AT
min. to max.
1,5 A
0,5 A
3,15 A
DRX-1-15-AT
max. to min.
1,5 A
0,5 A
3,15 A
DRY-1-25-AT
min. to max.
2,5 A
0,5 A
5,0 A
DRX-1-25-AT
max. to min.
2,5 A
0,5 A
5,0 A
INTENDED AREA OF USE
■
Speed control of motors / fans in ventilation systems
■
For indoor use only
TECHNICAL DATA
■
Supply: 230 VAC ±10 % / 50 - 60 Hz
■
Unregulated output load (L1): 230 VAC / max. 0,5 A
■
Regulated output to motor / fan, U:
►
max. load: 1,5 for DRX / DRY-1-15-AT
►
max. load: 2,5 for DRX/DRY-1-25-AT
■
Speed control:
►
DRX – from maximum to minimum
►
DRY – from minimum to maximum
■
Minimum speed adjustment by trimmer: 60—230 VAC
■
Green operating LED indication: on / off
■
Enclosure:
►
DIN rail mounting (DIN EN 50022)
►
ABS/PC, grey (RAL 7035)
■
Protection standard: IP30 (according to EN 60529)
■
Operating ambient conditions:
►
temperature: 0—40 °C
►
rel. humidity: < 80 % rH (non-condensing)
■
Storage temperature: -14—50 °C
STANDARDS
■
Low Voltage Directive 2006/95/EC
■
EMC Directive 2004/108/EC: EN 61326
■
WEEE Directive 2012/19/EU
■
DIN rail EN 60715:2001
■
RoHs Directive 2011/65/EU
DR
ELECTRONIC FAN SPEED
CONTROLLER, DIN RAIL MOUNTING
