Dr. Neuhaus TAINY IQ-LTE, Руководство пользователя

Страница: 61 / 147

WAN Settings
TAINY iQ Page 61 of 147
IPv6-Operation
Mode IPv6 im lokalen Netzwerk
You can specify whether the global IPv6 address from the mobile service
provider or the 6to4 tunnel should be made available to the local network
at the LAN interface.
If IPv6 addresses are to be made available on the LAN interface, select
the setting "Provide global addresses to the LAN". With this setting,
computers using Neighbor Discovery Protocol connected to the TAINY IQ
LAN can obtain globally unique IPv6 addresses from the TAINY IQ.
If an IPv6 address is not required, select the IPv6 Disabled setting.
With the setting "Only Link-Local Address" the local network at the LAN
interface only displays the Link-Local Address of the TAINY IQ valid within
closed network segments.
The format prefix of the link-local address is "fe80 :: / 64"
On the "LAN status" web page you can see under the
entry “ IPv6
Address(es) ”, which IPv6 address (es) has been set.
DHCP Settings DHCP Operation
The TAINY IQ-LTE provides a DHCP server function or a DHCP relay
function.
If the DHCP server function is
activated, the TAINY IQ-LTE itself
assigns IP addresses to
applications connected to the LAN
interface. Define the range of
address the assigned IP addresses
shall be taken from and/or static IP
leases.
If the DHCP relay function is
activated, the TAINY IQ-LTE routes
the DHCP requests of applications
connected to the LAN interface to a
remote DHCP relay server which
provides the IP addresses. Enter
the hostname or the IP address of
the DHCP Relay Server.