Dr. Neuhaus TAINY IQ-LTE, Руководство пользователя

Страница: 36 / 147

Configuration
Page 36 of 147 TAINY iQ
4.3 Valid characters for user names, passwords and other inputs
Valid characters For user names, passwords, host names, APN and PIN the following
ASCII characters may be used:
usernames
and
passwords # @ ~ % $ , * ' = ! + - \ / ? ( ) { } . : ; [ ] _ |
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
hostnames
and APN
. -
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
PIN PINs support numeric characters only
0 1 2 3 4 5 6 7 8 9
Some parameters accept additional special characters.
4.4 Establishing a configuration connection
Set up a Web browser
Open the start page of
the TAINY IQ-LTE
Proceed as follows:
Launch the Web browser (e.g. MS Internet Explorer version 11 or later or
Mozilla Firefox version 37 or later, Chrome version x or later).
Enter the full TAINY IQ-LTE address in the address line of the browser.
The factory setting is: https://192.168.1.1
Result: A security message appears. In Internet Explorer 7, for example,
it is the following:
Confirm the security
message
Acknowledge the corresponding safety message with "Continue loading
this page …"
Note
Because the device can only be administered via encrypted access, it is
delivered with a self-signed certificate. In the case of certificates with
signatures that are unknown to the operating system, a security message
is generated. You can display the certificate.
It must be clear from the certificate that it was issued for Sagemcom Dr.
Neuhaus GmbH. Since the web user interface is addressed via an IP
address and not a name, the name specified in the security certificate, is
different from the one in the certificate.