MACH 120F/120
Ceiling, Wall, Stand model
Dr. Mach
Lamps and Engineering
59080001
Edition 08
06.02.2010 / Bak Page 8/19
4.3.3 Changing the filter disk
The filter disk between reflector and protective disk
(Mach 120F only) prevents a damaging heating of
the illuminated area.
ATTENTION!
The lamps may not be used without this filter.
To change the filter disk 55 proceed as follows:
•
Attention!! Turn off the lamp!
•
Remove housing lower part 02 as described at
point 4.3.1.
The filter disk 55 is held by the 4 springs (holders)
54.
•
Press the filter disk 55 carefully against 2 springs
54a (I.) and lift it off the other 2 springs 54b (II.).
•
Insert the new filter disk in reverse order.
Only use filter disks that have been cleaned
properly.
•
Fix the housing lower part 02 as described at
point 4.3.1.
02
27
54
55
54a
54b
I.
I.
II.
II.
55
