22
english
For tanning units with body cooler you can switch it
on / off with the key
Â
at the digital timer (Fig30).
Fig. 30
ON/OFF
8.8.
À Á
Ä
Ã
Â
Replacing the Lamps and Starters
USE ONLY THOSE LAMPS WHICH ARE DESIGNATED
ON THE SPECIAL LAMP LABEL LOCATED AT THE REAR
OF THE CANOPY.
The UV life of the lamps vary from manufacturer to
maufacturer, but is usually between 500 and 700
hours of use.
Only authorised, original parts and factory
components can be used in this machine; please
make sure to have your model type and serial
number available when ordering these from your
DR. KERN distributor.
As in all other service operations, the tanning unit
must be disconnected from its power source. In
order to replace lamps and starters, the acrylic
panes must first be removed from the top and the
recliner segment. The pane in the recliner is held in
place in a groove running along the front and in a
mounting profile along the rear longitudinal side.
The mounting profile is clipped together with the
pane into the rear longitudinal side. To remove the
pane, the profile must be pressed slightly downward
and pulled forward with uniform pressure. The
acrylic pane is then released along the rear side
and can be removed from the recliner.
Please note:
The acrylic pane expands under the influende of heat,
i.e. it becomes longer and wider, which means that it
should only be removed when cold.
Fig. 24
Fig. 23
To replace the pane, inserted it into the groove along the
front side and set it down on the supports in the recliner.
Fig. 24.
Acrylic pane
Longitudinal stringer
mounting profile
Groove
Acrylic pane
Bedienung
The tanning unit will be switched on by using the On/Off-
switch
À
(
Fig.30) at the digital-timer.
With the keys
Ã
and
Ä
(Fig30.) you can select your
tanning time (max. 30 minutes).
Ä
=up,
Ã
=down
After lopse of time the digital timer of the tanning unit switches
off automatically. For cooling the tanning unit the integrated
fans are working for further 3 minutes.
For tanning units with facial lamps the digital timer (Fig.30)
has to be switched on with key
Á
.
SThe facial tanner achieves his full tanning capacity after an
exposure time of 3 minutes.
After switching off and immediate resetting the tubes ignite
after 3 minutes again.
Timer adjustment
j
umper 1 (time period):
opened = maximum period 30 min
closed = maximum period 60 min
jumper 2 (fan delay)
opened = without fan delay
closed = with fan delay
jumper 2 jumper 1
Fig. 30
Содержание excellent 24/1
Страница 28: ...28 Notizen notes...