Dr. K. Hönle Medizintechnik GmbH
dermalight
®
80
uva
B
EDIENUNGSANLEITUNG
O
PERATING
I
NSTRUCTIONS
5
3.
O
PERATION
Plug the
dermalight
®
80
into a mains outlet (230 V / 50 Hz). Operate the
dermalight
®
80
only from properly installed socket outlets. The plug should only be operated in horizontal
position in order to avoid, that it falls out of the mains outlet (you can use a triple socket
assembly). With the rocker switch on the top of the unit you can switch the
dermalight
®
80
on and off. After the unit is switched on there may be an ignition delay of up to 30 seconds
before the lamps emit a uniform light.
The
dermalight
®
80
is ready for use immediately after lamp ignition, i.e. there is no warm-up
period.
3.1.
O
PERATION WITH THE
C
OMB
A
TTACHMENT
To use the
dermalight
®
80
with the comb attachment (Art.-no.
995200), slip on the attachment from the front of the unit until
the two lugs on the comb snap into the recesses in the
dermalight
®
80
. The attachment is correctly fitted when the
four guide ribs of the comb are inside the guide slots of the
dermalight
®
80
. The “dr. hönle”-logo then lies at the front of
the
dermalight
®
80
.
3.2.
O
PERATING
C
ONDITIONS
dermalight
®
80
is designed for use in dry rooms with an ambient temperature never
exceeding 45 °C.
Be sure to protect the unit from chemical vapours and never use it in potentially explosive
atmospheres.
The unit can be used at any angle.
