manualshive.com logo in svg

Dr. Escherich TAIFUN-CLEAN 014, Руководство по эксплуатации

Поделиться
Скачать
Dr. Escherich TAIFUN-CLEAN 014 Скачать руководство пользователя страница 21

Installation | 4

TAIFUN-CLEAN 014/015/016

21

4.5 Electrical Cables and High Voltage Supply

The devices can be equipped with an AC or DC ioniser.

4.5.1 Electrical Cables and High Voltage Supply for AC Ionisers

NOTICE

Equipment damage due to an unsuitable HV power supply

If an unsuitable HV power supply is connected, there is a risk of damage to and de-
struction of the HV power supply and the connected ionisers. The warranty becomes
invalid.

w

Connect the ionisers only to a suitable Dr. Escherich HV power supply.

NOTICE

Risk of a short circuit due to deformation of the HV cable

Severe constriction or crushing of the HV cable (e.g. by cable ties) can cause damage to
the interior insulation and thus after a time lead to a short circuit.

w

Avoid excessive mechanical stress on the HV cable by deformation.

w

Observe the minimum bend radius for HV cable (see Technical Data of the ioniser).

NOTICE

Equipment damage due to an electric arc

High voltage is applied to coaxial plugs of AC ionisers. When the HV power supply is
switched on and coaxial plugs are being plugged in or out, an arc may occur and dam-
age the socket of the HV power supply and the coaxial plug of the AC ioniser.

w

Plug in and out coaxial plugs of the AC ionisers only when de-energised.

The AC ioniser is supplied with high voltage by an external HV power supply – the ion-
iser is connected to this external HV power supply via a HV line.
The HV cables of the ionisers are connected to the HV power supply via screw connect-
ors.
1. Make sure that the HV power supply is switched off.
2. Screw the cap nut hand-tight.

Maximum permitted torque: 1 Nm.

 NOTICE! When screwing on the cap nut, make sure that the cable does not

turn with it.

3. Close the unused sockets with blanking plugs in order to keep out dust and damp-

ness.

Earthing for the ionisers is provided via the existing HV cable and plug. No extra earth-
ing is required.
Detailed information, e.g. the maximum connection length, can be referred to in the
operating instructions of the ionisers and HV power supplies.

Содержание TAIFUN-CLEAN 014













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды