8
2.3.2.1 KDA Software Configuration
1). From the main menu screen, select “Hardware Setup”. (See figure 2.3.2.1a)
2). From the “Edit Hardware Setup” pop-up window, enter the number of GLD units you are connecting (1-3) in the
“auxiliary displays” section and press “OK”. (See figure 2.3.2.1b)
Note: The Firmware type must be set to “Timestamp” and Docking module 1 must be set to “RS485”. (See figure
2.3.2.1b)
Fig. 2.3.2.1a - "Hardware Setup" can be accessed from the main screen
Enter the number of GLDs being connected
Fig. 2.3.2.1b - The "Edit Hardware Setup" menu pops up when the "Hardware Setup" button is
selected