DPS Telecom CellVoice 16, Руководство пользователя

Страница: 38 / 88

34
How to Send SMS Notifications 10.3
1. Click on the Notifications button in the Provisioning menu. You can setup as many as 8 different notifications.
Begin the setup "wizard" by clicking on Edit for a notification number. In this example, we'll setup Notification 8 to
send an SMS notification.
2. At the Notification Setting screen, select the conditions you want to be notified of from the drop down: Notify on
both Alarms and Clears, Notify on Alarms only, Notify on Clears only. (Selecting Notification Disabled means
you will not receive any type of alerts.) Select Send SMS and click Save and Next.
3. At the next screen, you'll enter the phone number or email address that the Cell16 should send a message to
when the alarm that corresponds to this notification is triggered. Enter the phone number or email address, select an
email gateway if necessary, and choose whether you want the Cell16 to dial ONLY if a Backup Mode Point is set.
Then click
Save and Next .
Note: When sending an SMS, you can either use hyphens to separate phone numbers or type the entire number in
without hyphens (555-555-5555 or 5555555555). However, if you are sending an SMS using the Email Gateway ,
you must remove all dashes. Example : 555-555-5555 becomes 5555555555@txt.att.net
5. At the Schedule screen, you'll select the exact days/times you want to receive notifications. You can set 2
schedules per notification. For example, you may want to send after hours or at certain times during the week, and
at different hours on the weekend. Use the check boxes to select the days of the week, and select the time from the
drop down menus. Click
Save and Finish. To try a test notification, click the Test button (See next step.)
6. Click Test to send a test SMS notification. NOTE: This test only means that your notification settings are
correct, but you still need to assign the notification to an alarm point (See step 6 of the "How to Send Email
Notifications" section).