DPM 5900672652154, Руководство пользователя

Страница: 7 / 20

WL528DB
7
Transmitter installation 
Before installing the button (transmitter), check if the operating range of doorbell is correct. The button
can be mounted permanently to the mounting surface by screws.
 Do not install the button (transmitter) directly on metal surfaces, as it may cause inter -
ference and reduce the range of the doorbell
/
The transmitter is recommended to be
installed in places not exposed to prolonged and heavy rainfalls and in sunny places.
If necessary, an additional cover should be used
/
When drilling assembly holes, pay
attention to the location of electric cables and other installations. It is recommended
to use a detector for detecting pipes and pipes in walls, eg KC098YB or V31 from DPM

Before using the transmitter for the first time, remove the battery protecting tape.
Battery replacement
Transmitter Receiver

It is recommended to use alkaline batteries
/
Used batteries as hazardous waste should
be thrown into specially marked containers or handed over to a separate collection
point. Do not dispose of batteries in the trash bin
/
Do not use new and used batteries
at the same time.
 Hereby, DPMSolid Ltd SP. k. declares that wireless doorbell WL528DB is in compliance with Di -
rective 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://www.dpm.eu
Sicherheitshinweise für den Gebrauch 
1. Die Bedienungsanleitung ist Bestandteil des Produktes und muss zusammen mit dem Gerät aufbe-
wahrt werden.