CHECKS PRIOR TO USE
Before using Sekur EsCAPe verify the presence of the anti-‐tamper seal
intact. This should ensure no manumission or previous use were
occurred. In addition perform visual inspection to ensure no damage is
evident.
USE
The operator should refer to figures from 1 to 6 to use Sekur EsCAPe.
Open the package pulling out the adhesive tape and put out the anti
moisture bag and open it using the pilot cutting. Put out the device,
bite the mouthpiece and wear the clip nose. Subsequently don the
hood and tighten the elastic rope up to obtain a good seal around the
neck.
Warning: Absolutely do not speak during use.
AFTER USE
Sekur EsCAPe can be used only once. Because the device is a special
waste, after use it must be disposed according to the local legislation.
VISUAL INSPECTION
Check the integrity of the external package, straps and hanging clip if
they are present. Check the presence of the anti-‐tamper seal to
guarantee no damaging or violation occurred.
MAINTENANCE
Maintenance has to be performed by the manufacturer at his
maintenance and assistance service centre. In addition to daily visual
inspection, below is reported the maintenance schedule:
