8. Wiring Diagram
28
Warming!
1. brake cable (Brown)
Connect the negative electrode of the stop lamp Directly
Picture displays when braking only, Sounds only when driving, but "warming" will show up
as a tip on the screen;check the cable above and connect the negative electrode of the stop
lamp Directly
2. backing car cable (Orange)
Connect the ground electrode if there isn't car rear view camera built up in your car.
Connect the stop lamp +12V as above if there is car rear view camera built up in your car
The key lamp turns on when the Panel lamp cable is connecting 12V, no connecting,no light
3.
Refer to the instruction manual for more details.
White
White/Black plug
Gray
Gray/Black plug
Black
White/Brown plug
Red
White/White plug
Red/White plug
White/White plug
Green
Purple
Green/black plug
Yellow
Purple/black plug
Black
Blue
Orange
Brown
Red/Red plug
DC: 8.5-16V
Note!
DC 8.5-16V refers that the product will
work normally only under the voltage
between 8.5V to 16V.
Содержание DP455
Страница 1: ...DP455 ...