26
7. Installation guide
Caution:
Before installing, please make sure the device can work normally.
Please use provided accessories only to ensure proper installation. Unqualified components
may cause faults.
If it is necessary to drill holes or refit the vehicle before installing, please consult a local retailer.
Do not install the device at the place that blocks the driver's sight or may bump the
passengers when the vehicle is stopped suddenly (braked).
The semiconductor laser parts will be damaged if they are too hot; therefore, do not install
the device in a location with high temperatures, such as
near the heater vent.
If the installation angle is larger than 30 horizontally,
the device may not be able to exert the optimal performance.
1. Installation
Put the hardware installation sleeve into the installation
space of body instrument panel. Bend the metal claw
to 90 degrees with a tool to fasten the hardware
installation sleeve. Floor-mounted iron rods are
fastened with the metal connected with the body frame
to increase anti-interference performance. Slide the main
part into the installation sleeve until the clips on both sides clamp the main part.
Содержание DP455
Страница 1: ...DP455 ...