FAM SROxG Nav key rev 10-14.doc
11/14
A-16
Programming a product recipe
Note : the control can hold up to 99 recipes. Each recipe can have up to 8 stages.
Use navigation key to select desired recipe and press
.
To edit a new or existing name:
use navigation key to select and edit name or option name and press.
-EDIT NAME: Use navigation key to select each letter and press
to step to the next letter.
-OPTION NAME: Select one of the library listed product name.
After product name is edited, you will enter to the following recipe programming mode.
1-PREHEAT
If no preheat needed: Use navigation key to step on next programming function.
If preheat needed: Use navigation key to select preheat and press.
use navigation key to select YES and press
. Use navigation key to set the desire preheat temperature and press
to exit and save preheat function.
2-STAGE PROGRAMMING
Use navigation key to select the product stage 1 and press
. Display will show the following programming
process.
a) Set stage timer: Use navigation key to select desired current stage cooking time and press
.
b) Set temperature: Use navigation key to set the current stage temperature and press.
c) Steam: If no steam is needed, press
to skip steam function and go to FAN speed.
If steam is needed, use arrow to select YES and press
. Use navigation key to select SHOT or PULSE and
press
. If SHOT is selected, Use navigation key to select LOW(+/- 0.67 us gallon/ 2.6 liters) or HIGH(+/- 1
Usgallon/4 liters) steam and press.
If after steam SHOT fan delay is needed, set the fan off delay time (0 to 3min) and press.
If no fan delay
needed set the time to 00:00.
To exhaust excess of steam after steam process, add desired time (0 to 3min) to activate and press
. I f no
need set the time to 00:00
If pulse is selected, use navigation key to select STD(steam every 2 minutes), HI(steam every 1 minute) or
MED(steam every 1.5 minutes) pulse and press
.
d) Fan delay: If no fan delay is needed, press
to skip to fan cycle. If fan delay is needed, use navigation key to select
LOW (1 minutes) or HIGH (3 minutes) and press. I
f a fan off delay is needed, press
to step to fan cycle.
e) Fan Speed: If fan speed STD is ok, press. If
HIGH fan speed, is desired, use arrow to select HIGH and press
.
f) Vent opening : If Vent need to be open during the stage set desired time you want the vent open, exp: if after 15 min
baking you want vent open set 15:00min, vent will open after 15 min for the balance of the stage time. normally
use to exhaust excess of product vapor before end of baking process or prevent excess of vapor coming out
during opening door.
You have now completed 1 stage program. If another stage is needed, select stage 2 and follow same process as stage 1.
If a 2nd stage is not needed, use navigation key to exit and the recipe will be registered.
