Doyon SRO1E, Руководство пользователя

Страница: 24 / 35

TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
ANSWERS TO MOST FREQUENT QUESTIONS
Always cut off the main power before replacing any parts. Take care of water and electric wire
supply system when pulling the oven.
WARNING: Always disconnect the power supply to the appliance before cleaning, doing preventive
maintenance or servicing.
WARNING: Contact the factory, the factory representative or a local service company to perform
maintenance and repair.
Convection blower, vent motor and rack lift/rotating system are on the top of the oven. These
components are sealed and don’t require lubrication.
Electric Control parts, water manual shut off valve are behind the control panel door.
BEFORE CALLING FOR SERVICE ANSWERS TO MOST FREQUENT QUESTIONS
Questions Solutions
The oven temperature drops when
loading and needs a certain amount
of time before it stabilizes. This is normal. The opening of the door produces an
important loss of heat. The rack loaded with cold
pastries need a large amount of heat to get back to its
original temperature. The same thing happens with
domestic ovens. You will realize that your new SRO
oven can provide an excellent baking quality for any
kind of products you want to bake.
The oven does not turn on. Check the breakers of the building.
Check the breaker on the front panel.
Check if the door is tightly closed.
Inside the control compartment, check if the breaker of
the convection blower is ON
The oven does not produce heat. Make sure the thermostat is adjusted to a temperature
high enough to turn on the heat.
Check that the heating contactor breaker are ON.
1. If the Hood Vent Blower is not on
Check its power supply.
2. If the oven blower is not on
Check the breaker behind the control door.
If it does not start up again, contact our company or a
certified technician.