BTF080/ BTF100/ BTF120/ BTF140-E1R2
Page 29
If necessary, proceed as follows to stretch the belts:
•
Disconnect the electrical current at the master switch and pull the plug out from the electrical socket.
•
Unbolt the screw of the upper cover.
•
Loosen the screws of the motor’s support.
•
Turn the stretcher screw of the motor located at the machine’s interior until the belts are correctly
stretched.
•
Tighten again the screws of the motor’s support.
•
Close the command cover and bolt the screw of the cover.
Depending on the frequency of use and the machine’s efforts, this period could change. The relation is
inversely proportional: the more frequent is the use and the machine’s efforts, the shorter is the time between
each checking.
7.3.2.- CHECK THE STATE OF THE BOWL’S FIXING SYSTEM
The installation of the bowl’s fixing device must be done by authorised and trained personnel.
The installation of the bowl’s fixing device (illustration 9) must be done as follows:
Check which screw needs to be fitted;
Unbolt the counter-nut;
Fit the screw;
Bolt the counter-nut.
BTF080/BTF100/BTF120/BTF140
Illustration 9
