English
English –
29
• With selector switch (optional accessory)
The selector has two positions with automatic return to the centre
(
fig. 43
).
(*) This item must be compiled by the person who programmed
the automation.
• Control with safety devices out of order
In the event of safety devices malfunctioning or being out of ser-
vice, the door may still be moved.
01.
Operating the gate control (with remote control or key selec-
tor switch). If the safety devices give consent the door opens
normally; otherwise within 3 seconds you must try again and
keep the control actuated.
02.
After approximately 2s the door will start moving in the “man
present” mode, i.e. so long as the control is maintained the
gate will keep moving; as soon as the control is released the
gate will stop.
If the safety devices are out of order the automation must be
repaired as soon as possible.
11.2 –
Gate control
• With radio transmitter
The radio transmitter provided is already ready for use and the
four keys have the following functions (
fig. 42
):
(*) This table must be compiled by the person who programmed
the automation.
Function(*)
T1 Key
T2 Key
T3 Key
T4 Key
Action
Rotated to the right: “OPEN”
Rotated to the left: “STOP”
Function
(*)
Stops the door movement
sectional or up-and-over
42
T3
T4
T1
T2
43
––– STEP 11 –––
It is recommended to keep this guide and make it available to all
users of the automation.
11.1 –
Safety precautions
• Supervise the door in movement and keep at a safe
distance until the door is fully open or closed; do not
pass through the opening until the door is fully open and
stopped.
• Do not let children play near the door or with its com-
mands.
• Keep the transmitters away from children.
• Immediately discontinue use of the automation as soon
as you notice any abnormal functioning (noises or jolting
movements); failure to heed this warning may result in
serious dangers and risks of injury.
• Do not touch any part while it is moving.
• Do perform periodic checks as provided for in the main-
tenance schedule.
• Maintenance or repairs must be carried out only by quali-
fied technical personnel.
USAGE GUIDE
