Dovpo Ember 80 Kit, Руководство пользователя

Страница: 5 / 8

12. Automatic Mode
A recommended wattage value will be set every time a
new atomizer is attached to the device. You can still
adjust wattage after the device gives you a recommen-
ded wattage.
Automatic Mode works only with Wattage Mode.
8.2 When in Temperature Control Mode, it will display
desired temperature value on the left and real-time
temperature on the upper right corner and puff counter
on the bottom right corner.
9. Reset Puff Counter
Reset the puff counter by pressing the fire button 3 times
quickly. The maximum puff is 999, it will go back to 0
when max out.
10. Adjust Preheat Power
When in Temperature Control Mode, hold both fire button
and “+” for 1.5s, the wattage value on the upper right
corner will be flashing, press “+” or “-” button to adjust
preheat power.
11. The device will change back to Wattage Mode when
using non-temp controlled wire in Temperature Control
Mode.
009
120 ℉
Real-time Temperature
Puff Counter
Desired
Temperature
600
Ni
F
Resistance Recommened Wattage
0.3 Ω
0.5 Ω
1.0 Ω
1.5 Ω
50W
30W
16W
12W
4