Dovpo Ember 80 Kit, Руководство пользователя

Страница: 6 / 8

16. Charging
16.1 When charging the battery with micro USB cable, the
battery icon will indicate it's getting filled up. The
energy grid will display full after battery being fully
charged.
Charging current is 1,000mA. The screen will go dim
after the battery is fully charged.
16.2 You can vape while charging the device.
13. Lock Mode
Hold both fire button and “-” button to lock the device.
Screen displays “KEY LOCKED”. “+” and “-” buttons will
be disabled in Lock Mode. When you try to adjust
wattage with “+” or “-” button, the screen will display
“HOLD FIRE AND MINUS TO UNLOCK”.
Hold fire button and “-” button to unlock the device.
14. Screen Rotation
Hold fire button, “+” and “-” buttons at the same time
to rotate the screen by 180 degrees
15. Error Messages
No Atomizer: “CHECK ATOMIZER”
Short Circuit: “SHORT”
Overtime Vaping: “10S OVER”
Resistance too High: “RES TOO HIGH”
Resistance too Low: “RES TOO LOW”
Board Overheat (Over 85°C): “TOO HOT”
Input Voltage Over 4.3V: “HIGH VOLTAGE”
Output Voltage Below 2.5V: “WEAK BATTERY”
5